How often should my granite or marble countertop be sealed?

“Should I seal my granite and marble, and how often?” is a question we are frequently asked. Homeowners want to know if sealing granite and marble is necessary, and if it will prevent any and all stains.

The best answer is perhaps a qualified, “It depends.” Generally speaking darker granites like Ubatuba and Tropic Brown do not need sealing very often, and once per year is usually sufficient. Dark stones are denser than lighter ones, and any stains are usually nearly invisible or barely perceptible because of the darkness of the stone. In plain terms the lighter the color, the more often you should seal it. White and light-colored granites should be sealed more often. Most recommendations would say every three months.

Marble, especially light colored marble, should be sealed more often as an extra precaution. Re-sealing marble every 3-6 months is a good idea.

While it may seem like quite a project, sealing countertops is a very easy process and that homeowners should not be afraid of. It should only take just minutes and there usually little to no elbow grease involved.

Good quality sealing products can be purchased at any home improvement retailer and a small, inexpensive bottle will last many sealing applications. The peace of mind provided by sealing easily outweighs the minimal expense and short time required.

Sealing granite or marble is easy:

  1. Clear everything off the counters so the entire surface is accessible.
  2. Clean the surface with a mild detergent (dish soap is fine).
  3. If needed, scrape away any built up residues that may have accumulated since the last time the surface was thoroughly cleaned. A single edged razor blade or scraper can be helpful, but be careful not to gouge the blade into the countertop or your finger!
  4. If needed, acetone can help remove residues from things like window cleaners and will help strip even the old sealer off.
  5. Follow the directions on the container to apply the sealer. Most often it’s just a matter misting the sealer on, letting it soak in, and wiping away the excess. Sealing a typical kitchen usually requires less than 20 minutes, and vanities often even less. Applying a second coat may provide a greater sense of security, but is not always helpful or necessary since most stones will stop accepting sealer at some point.
  6. Congratulations! Your stone is protected and you’re now done for months to come!

Between sealing treatments one of the real keys to preventing stains is to clean up any spills as quickly as possible before liquids even have a chance to penetrate the surface.

 

 

Have more questions? Submit a request

Comments

Powered by Zendesk